IBM 1725 SLS - Manual (Page 231)

Updating
System
Software
8-47 Printer Options
ing the Next key. For this example we are using the internal
hard disk. Press the Select key. The system begins loading,
and the following message displays (the y.y represents the
system revision number):
BOOT SYSTEM
LOADING Y.Y
15 At this point, DO NOT TOUCH ANY KEYS until the system
has completed loading. The system may go through many
cycles of rebooting, which can take several minutes. When
the system rebooting is complete, the following message
appears:
IDLE
16 If you do touch some keys during this step, you must go
back to step 10 and start from there again.
17 Verify your printer’s configuration by printing out another
advanced status page and comparing it to the page printed
before loading the new system.
L