Impex GS-9 - Manual (Page 16)

STEP 8 (See Butterfly Cable Loop & Diagram 8)
A.) Attach the 114” Butterfly Cable (#95) to the slot on the back of Left Butterfly (#20). Draw the
Cable through the slot then to the open left Swivel Pulley Bracket (#72).
B.) Attach a Pulley (#79) to the bracket. Secure it with one M10 x 1 ¾” Allen Bolt (#98), two
∅
¾”
Washers (#6), and one M10 Aircraft Nut (#5).
C.) Draw the Cable around the Pulley then downward. Install a Pulley to the Angled Double
Floating Bracket (#51). Let the Bracket hanging for now.
D.) Draw the Cable upward to the right Swivel Pulley Bracket. Install another Pulley.
E.) Draw the Cable to the Right Butterfly (#26) and secure the cable end to the slot.
BUTTERFLY CABLE LOOP DIAGRAM
15