Impex GS-9 - Manual (Page 7)

STEP 2 (See Diagram 2)
A.) Attach the Right Vertical Beam (#21) to the Right Base Frame (#46). Secure it with two M10 x
2 ½” Carriage Bolts (#17),
∅
¾” Washers (#6), and M10 Aircraft Nuts (#5).
B.) Attach the Right Seat Support (#49) to the Right Vertical Beam. Secure it with one Bracket
(#7), two M10 x 2 ½” Carriage Bolts (#17),
∅
¾” Washers (#6), and M10 Aircraft Nuts (#5).
C.) Attach the other end of Right Seat Support (#49) to the Right Base Frame (#46). Secure it with
one M10 x 2 ½” Carriage Bolt (#17),
∅
¾” Washer (#6), and M10 Aircraft Nut (#5).
D.) Attach the Leg Developer (#40) to the front open bracket on the Right Seat Support. Secure it
with a Leg Developer Axle (#41), two
∅
¾” Washers (#6), and two M10 x ¾” Allen Bolts (#37).
6