IBM Enterprise Server H80 Series - Manual (Page 179)

Step 16
This step loads the Standalone Diagnostics. If you are unable to load the
diagnostics, go to “Step 7” on page 158.
1. Turn on the power.
2. Insert the diagnostic CD into the CD-ROM drive.
3. When the keyboard indicator displays, press the numeric 5 key on the keyboard
to indicate that diagnostics are to be loaded.
4. Enter requested passwords.
5. Follow the instructions to select a console.
Did the Diagnostics Operating Instructions display without any obvious display
problem?
NO Go to “Step 7” on page 158.
YES Go to “Step 9” on page 158.
Step 17
The diagnostics did not detect a hardware problem. If you still have a problem,
contact your software support center.
Chapter 8. Hardware Problem Determination 163