IBM Enterprise Server H80 Series - Manual (Page 34)

Using the CD-ROM Drive
CAUTION:
A Class 3 laser is contained in the device. Do not attempt to operate the drive
while it is disassembled. Do not attempt to open the covers of the drive, as it is
not serviceable and is to be replaced as a unit.
Your CD-ROM drive looks like the one shown in the illustration, and the controls are
located as indicated.
When the CD-ROM is set to On, the status light indicates one of several conditions.
The following are status light states and the respective conditions of the CD-ROM
drive:
Off during standby with the tray loaded or unloaded
Blinks from insertion of the tray to completion of initialization
Blinks slowly when disc is dusty
Blinks fast when in the audio mode
Lights during data transfer operations
Lights steadily when:
– No disc is in the tray
– The disc is in the tray upside down
– Some condition exists that should be checked. If this occurs, contact your
service representative.
1 Headphone Jack 4 Tray Opening
2 Volume Control 5 Emergency Eject Button
3 Status Light 6 Load/Unload Button
18 RS/6000 Enterprise Server Model H80 Series User's Guide