IBM Enterprise Server H80 Series - Manual (Page 67)

– Change I/O Type
Use this option to change the I/O type of the primary I/O drawer after a
service action or configuration change if the I/O type is incorrect. If this
option is chosen, you are asked to make two entries.
1. When asked for the drawer number, type 1 .
2. When asked for the I/O type, type 85 .
If you enter an invalid value, a failure message displays on the console. The
Power Control Network Utilities Menu is then redisplayed on the console.
Chapter 3. Using the Service Processor 51