Intel 1520 - Manual (Page 120)

108 Intel NetStructure Cache Appliance Administrator’s Guide
Using the save menu
The save menu lets you save the current appliance configuration to a floppy disk.
▼ Saving the current configuration to a floppy disk
1 Select the save menu, and press Enter. Doing so causes the system to prompt
you to insert a blank floppy disk.
2 Insert a floppy disk into the floppy disk drive, and press Enter. Doing so
causes the appliance to copy all the current configuration settings to the
floppy disk. After the operation, a message displays on screen indicating the
copy was successful and asks you to take the floppy out.
Note Do not leave the floppy inside the drive after saving the configuration. Doing so
will cause remote boot and halt operations to malfunction.
Using the load menu
The load menu lets you copy a previously saved appliance configuration file from
a floppy disk.
▼ Loading a previously saved configuration from a floppy
1 Select the load menu and press Enter. Doing so causes the system to prompt
you to insert a floppy disk into the drive.
2 Insert the floppy disk containing a previously saved configuration in the
floppy disk drive, and press Enter. Doing so causes the appliance to copy the
configuration from the floppy disk and load it on the system. After the
operation, a message appears on the screen indicating the copy was
successful.
Using the logoff menu
The logoff menu disconnects you from the appliance and logs you out of the
system.
▼ Logging off the system
1 Select the logoff menu and press Enter. Doing so causes the system to
disconnect you and return control to the VT100 terminal emulator window.