Intel 1520 - Manual (Page 71)

Chapter 5 Using the Command-Line Interface 59
Deleting a version of the appliance software
You can delete a version of the appliance software when you need to add a newer
version but you already have two versions installed.
Note You cannot delete the currently running version of the appliance software. To
delete that software, you must first switch to the second version and then delete
the other version. Also, if you have only one software version installed, you
cannot delete it.
▼ Deleting a version of the appliance software
1 Select the main menu, and press Enter.
2 Select versions, and press Enter.
3 Select delete, and press Enter.
4 Select the version you want to delete, and press Enter. Doing so displays a
confirmation prompt asking you whether you want to really delete the
version.
5 When prompted, press y to confirm or n to cancel.
Viewing which version of the appliance software is currently
running
You can check which version of the appliance software is running on your
machine.
▼ Viewing the current version of the appliance
1 Select the main menu, and press Enter.
2 Select versions, and press Enter.
3 Select current, and press Enter. Doing so displays a message that indicates
the current version number.
Clearing statistics
You can clear statistics that remain through reboot operations (persistent
statistics). Clearing statistics from the appliance initializes them to a pre-
installation state.
Note Clearing statistics involves stopping and restarting the appliance.
▼ Clearing statistics for the appliance
1 Select the main menu, and press Enter.
2 Select stop, and press Enter. Doing so stops all caching functions in the
appliance and displays a status message indicating such.
3 Select clear, and press Enter. Doing so displays a confirmation prompt asking
you whether you want to really clear statistics.
4 Be sure that y appears after the confirmation prompt and then press Enter.