Intel 1520 - Manual (Page 63)

Chapter 5 Using the Command-Line Interface 51
These menu selections let you do the following:
✔ setup—Change the system’s network address configuration and time
settings. See Using the setup menu‚ on page 52 for more information.
✔ main—Start or stop the cache and proxy services, check version information,
clear statistics, and install and delete software. See Using the main menu‚ on
page 54 for more information.
✔ config—Configure the appliance, including server, protocols, security, and
routing. See Using the config menu‚ on page 61 for more information.
✔ monitor—Monitor performance by viewing statistics. See Using the monitor
menu‚ on page 99 for more information.
✔ expert—Use the appliance’s expert feature. See Using the expert menu‚ on
page 107 for more information.
✔ save—Save the current configuration to a floppy disk. See Using the save
menu‚ on page 108 for more information.
✔ load—Load a saved configuration from a floppy disk. See Using the load
menu‚ on page 108 for more information.
✔ logoff—Logoff from the current login.
Navigating the command-line interface
The command-line interface consists of a series of menus that you can access to
adjust the system’s network configuration and control, and to configure and
monitor the appliance.
The following table explains how to navigate the interface:
To do this... Do this
Move from one menu item to another Use the up and down arrow
keys
Select a menu or menu item Move to the item and press
Enter
Return to the previous form or menu screen Press CTRL-X
Accept an action confirmation box Press CTRL-X
Accept changes to the form and exit it by
returning to the previous form or menu screen Press CTRL-X
Save information you have entered in a form’s
field and position the cursor at the next field.
You must press Enter for each field in the form Press Enter
Cancel all changes to a form and exit it by
returning to the previous form or menu screen Press ESC