Intel 1520 - Manual (Page 22)

10 Intel NetStructure Cache Appliance Administrator’s Guide
11 Use the arrow keys to highlight timezone and press the Enter key. Pressing
the Enter key causes a scrollable list of available timzones to appear. Here is a
partial list:
–United States Eastern
United States Central
United States Mountain
United States Pacific
12 Use the arrow keys to scroll through the available zones and highlight the
appropriate zone for your area. After highlighting the applicable zone, press
the Enter key. Next, press any key to save your selection and return to the
previous screen as follows:
network Configure Network
timezone Configure Time Zone
–time Configure Date and Time
view View Settings
Note In order for the timezone change to become effective, the appliance must be
rebooted. A reboot operation occurs later during the initial setup.
13 Use the arrow keys to highlight time and press the Enter key. Pressing the
Enter key causes the following fields to appear:
Enable(1)/Disable(0) Daylight Savings Time__
Currently Inside (1)/Outside(0) Daylight Savings Time__
Enter Time [HH:MM:SS] __:__:__
Enter Date [MM/DD/YYYY] __/__/__
14 Set your Daylight Savings Time options. Then enter the time using a 24-hour
format (e.g., for 2:14:56 PM enter 14:14:56). For each part of the format, you
must press Enter to accept the value and to move to the next part of the field.
For example, after entering the two-digit hour value, pressing Enter causes
the value to be accepted and positions the cursor over the minutes part of the
time field. Supply the date using the MM/DD/YYYY format. After supplying
the date, press the CTRL-X key combination to save your changes and return
to the previous menu as follows:
network Configure Network
timezone Configure Time Zone
time Configure Date and Time
–view View Settings
15 From this menu you can select view to verify the network and time
information you have entered. After you are sure all the information you have
entered is correct, press the CTRL-X key combination twice to move back to
the main menu as follows:
setup Initial Intel Cache Setup
–install Install Intel Cache
commit Commit Setup Changes
16 From the main screen, highlight install and press the Enter key. Selecting
install causes the settings to be written to the boot image. During the