Intel 1520 - Manual (Page 53)

Chapter 4 Configuring the Appliance 41
Setting ICP options
In the ICP section you can establish ICP peers.
The following table describes the ICP options.
Establishing ICP peers
For ICP to work, the appliance must recognize its ICP neighbors (siblings and
parents).
Option Description
ICP Mode Enables or disables ICP mode:
❚ Only Receive Queries
❚ Send/Receive Queries
❚ Disabled
ICP Port Specifies the port to use for ICP messages. The default
port is 3130.
ICP Multicast
enabled on/off Enables or disables multicast. If your appliance has a
multicast channel connection to its ICP peers, it can send
ICP messages through multicast.
ICP query
timeout Specifies the timeout for ICP queries in seconds.
ICP Peers View or modify the appliance’s ICP hierarchy.