Deleting remap rules, Viewing remap rules – Intel 1520 User Manual
Page 87
Chapter 5 Using the Command-Line Interface
75
3
Select remap, and press Enter.
4
Select add rules, and press Enter.
5
Enter a remap rule, and press Enter.
6
Press CTRL-X to save your changes and return to the previous screen.
Each rule must consist of three fields:
type target replacement
.
The following table describes the proper format for each field.
▼ Deleting remap rules
1
Select the config menu, and press Enter.
2
Select protocols, and press Enter.
3
Select remap, and press Enter.
4
Select delete, and press Enter. Doing so displays a list of the current remap
rules. If no rules exist, a message appears at the bottom of the screen
indicating such.
5
Use the arrow keys and position the cursor over the rule you want to delete,
and press Enter.
6
Press CTRL-X to save your changes and return to the previous screen.
▼ Viewing remap rules
1
Select the config menu, and press Enter.
2
Select protocols, and press Enter.
3
Select remap, and press Enter.
4
Select view, and press Enter. Doing so displays the file containing the remap
rules.
Field
Description
type
Enter either one of the following:
❚
map
—maps an incoming request URL to the
appropriate origin server URL.
❚
reverse_map
—use for location header modifying
rules.
target
Enter the
from
URL. You can enter up to four
components:
<scheme>://<host>:<port>/<path_prefix>
replacement
Enter the
to
URL. You can enter up to four
components:
<scheme>://<host>:<port>/<path_prefix>