Integra DTR-10.5 - Manual (Page 103)

103
Setup Men
u
Listening Mode Setup —Continued
A (Default): Outputs the source from the speaker
connected to the CENTER SPEAKERS A terminal.
B: Outputs the source from the speaker connected to the
CENTER SPEAKERS B terminal.
A+B: Outputs the source from the speakers connected
to the CENTER SPEAKERS A and CENTER
SPEAKERS B terminals.
e. Surr L/R Sp
This option configures the surround speakers to use
when the DTR-10.5 plays an input source such as DVD-
Audio and Super Audio CD. Select the speaker
terminals to which the speakers you want to use are
connected. This setting can be made when the
“(Speaker B) Surr L/R” is set to “Main A” in the
Speaker Configuration sub-menu.
• When the impedance setting for “Surr L/R A” or “Surr
L/R B” in the Speaker Impedance sub-menu is set to
“6 ohms” or “4 ohms,” the available options will be
“A” and “B.”
A (Default): Outputs the source from the speakers
connected to the SURR L/R SPEAKERS A terminals.
B: Outputs the source from the speakers connected to
the SURR L/R SPEAKERS B terminals.
A+B: Outputs the source from the speakers connected
to the SURR L/R SPEAKERS A and SURR L/R
SPEAKERS B terminals.
f. Surr Bk Speaker
This option configures the surround back speakers to use
when the DTR-10.5 plays an input source such as DVD-
Audio and Super Audio CD. Select the speaker terminals
to which the speakers you want to use are connected.
This setting can be made when the “(Speaker B) Surr
Back” is set to “Main A” in the Speaker Configuration
sub-menu. However, when the “(Speaker A) Surr Back”
is set to “BTL for Front,” “Bi-Amp for Front,” or “Not
Used,” this setting will not be displayed.
• When the impedance setting for “Surr L/R A” or “Surr
L/R B” in the Speaker Impedance sub-menu is set to
“6 ohms” or “4 ohms,” the available options will be
“A” and “B.”
• When the settings for “(Speaker A) Surr Back” and
“(Speaker B) Surr Back” in the Speaker Configuration
sub-menu differ, the available options will be “A” and
“B.”
A (Default): Outputs the source from the speakers
connected to the SURR BACK L/R SPEAKERS A
terminals.
B: Outputs the source from the speakers connected to
the SURR BACK L/R SPEAKERS B terminals.
A+B: Outputs the source from the speakers connected
to the SURR BACK L/R SPEAKERS A and SURR
BACK L/R SPEAKERS B terminals.
g. Subwoofer
This option configures the subwoofer to use when the
DTR-10.5 plays an input source such as DVD-Audio
and Super Audio CD. Select the terminal to which the
subwoofer you want to use is connected. This setting
can be made when the “(Speaker A) Subwoofer” is set
to an option other than “Not Used” in the Speaker
Configuration sub-menu. However, when the “(Speaker
B) Subwoofer” is set to an option other than “Main A”
in the Speaker Configuration sub-menu, the available
options will be “A” or “Not Used.”
A (Default): Outputs the source only from the
subwoofer connected to the SUBWOOFER PRE OUT
A terminal.
B: Outputs the source only from the subwoofer
connected to the SUBWOOFER PRE OUT B terminal.
A+B: Outputs the source from the subwoofers
connected to the SUBWOOFER PRE OUT A and
SUBWOOFER PRE OUT B terminals.
Not Used: No subwoofers are used for playback.
This sub-menu allows you to configure the audio effect
and playback options when you play DVD-Audio that is
input from the i.LINK (AUDIO) interface.
This sub-menu appears when the i.LINK (AUDIO)
terminal board [A] is inserted.
a. LFE Level
This option allows you to set the bass level for the
i.LINK(IEEE1394):DVD-Audio listening mode. The
LFE level setting made here will be applied to all of the
i.LINK(IEEE1394):DVD-Audio input signals. The
available settings are –
∞ dB, –20 dB, –10 dB, and 0 dB.
The option defaults to “0.”
b. SB Mode (5ch)
Selects the enhancement mode for playback when you
play a 5.1ch source as a 6.1 or higher channel source
through the DTR-10.5. The surround back setting you
select here will be applied to the
i.LINK(IEEE1394):DVD-Audio input signal “*/2.”
• When the “(Speaker A) Surr Back” is set to “BTL for
Front,” “Bi-Amp for Front,” or “Not Used” in the
Speaker Configuration sub-menu, this option will not
be displayed.
Dolby EX: Plays a 5.1ch source as a 6.1 or higher
channel source using the Dolby Digital EX mode.
PLIIx Movie: Plays a 5.1ch source as a 6.1 or higher
channel source using the Dolby Pro Logic IIx Movie
mode.
• When you set the (Speaker A) Surr Back setting to
“Main A 1ch (SBL)” in the Speaker Configuration
sub-menu, you cannot select “PLIIx Movie.”
i.LINK(IEEE1394):DVD-Audio Input
Setup Sub-menu