Connecting the power/basic operations, Turning on the power, Operating on the dtr-10.5 – Integra DTR-10.5 User Manual

Page 52: Push to enter, Rec/ zone 3 red ) ( main blue ( ) zone 2 green ( )

Advertising
background image

52

Connecting the Power/Basic Operations

• Before you plug in the DTR-10.5, confirm that all connections have been made properly.
• Turning on the power may cause a momentary power surge, which might interfere with other electrical equipment

on the same circuit, such as computers. If this happens, use a wall outlet on a different circuit.

Note:

Any components connected via

will also be turned

on when the remote controller’s [On] button is pressed.

Phones

Listening

Mode

Audio

Selector

Tone

Zone 2

Select/ Preset

Push To Enter

Setup

Control / Tuning

Push To Enter

Rec/ Zone 3

Digital

S Video

Video

Audio

L

R

Video 7 Input

Level

Exit

Level

Dimmer

Memory

Tuning
Mode

Clear

Pure Audio

Open

DVD

Display Tape

1

Tape

2

Tuner

Phono

C D

Net Audio

Video 1

Video 2

Video 3

Video 4

Video 5

Video 6

Video 7

Standby

Master Volume

Rec/ Zone 3 Red )

(

Main Blue

(

)

Zone 2 Green

(

)

Standby/On

Standby/On

Master Volume

Standby indicator

Input source buttons

To wall outlet

Turning on the Power

1

Plug the power cord into an AC
wall outlet.

The [Standby] indicator will light up.

2

Press the [Standby/On] button to
turn on the DTR-10.5.

The display will light up and the
[Standby] indicator will turn off.
If you press the [Standby/On] button
again, the DTR-10.5 returns to the
standby state.

Standby

Standby

Standby/On

Turn off

Operating on the DTR-10.5

1

Select an input source.

Press the input source button.
*You cannot listen to a source in main
room A, and to another source in main
room B.

2

Start playing the device selected.

When playing a picture device such as a
DVD player, you need to switch input to
a monitor such as a TV set.
Some picture-playing devices such as a
DVD-type game machine may also
require setting of sound output. Refer to
the manual of the device connected.

3

Adjust the volume level with the
[Master Volume] dial.

You can adjust the volume level in the
range from –

, –81.5 dB to 18.0 dB

(Max) (when Relative is selected in the
Volume Setup sub-menu).

Hint:

The DTR-10.5 is a product for users to
enjoy home theater, so it is equipped
with a wide range of volume levels.
Please fine tune the volume level
according to your preferences.

Display

Tape 1

Tape 2

Video 4

Video 5

Video 6

Video 7

DVD

Video 3

Video 2

Video 1

C D

Net Audio

Phono

Tuner

Master Volume

Advertising