Integra DTR-10.5 - Manual (Page 123)

123
Setup Men
u
Lock/Version Setup
The following sub-menus allow you to lock your settings or display the software version of the DTR-10.5.
a. Lock
You can lock all of the setting menus to prevent settings
from being changed by mistake.
Locked: Powering on and off will resume the setting
when it was locked, discarding any modification that
was made after locking.
Unlocked (Default): No lock on setting operations.
This section deals with confirmation of the firmware
version for each program currently installed in your
DTR-10.5 (No procedure is provided for updating the
firmware).
a. Master version
Confirm the firmware version for the main program.
b. i.LINK(IEEE1394) version
Confirm the firmware version for i.LINK. This item
appears when the i.LINK (AUDIO) terminal board [A]
is inserted.
c. Net-Tune version
Confirm the firmware version for the Net-Tune
program. This item appears when the ETHERNET
terminal board [B] (for Net Audio) is inserted.
d. HDMI version
Confirm the firmware version for HDMI. This item
appears when the HDMI terminal board [L] is inserted.
Lock Setup Sub-menu
Firmware Version Sub-menu