Input setup, Setup men u – Integra DTR-10.5 User Manual
Page 93
93
Setup Men
u
Input Setup
Items described here are set when you press the input source buttons.
The DTR-10.5 is equipped with several types of jacks in addition to the standard audio and video jacks, and multiple jacks
are provided for each type. You may freely assign input sources such as CD, PHONO, TUNER, TAPE 1, TAPE 2, and
VIDEO 1-7 to these jacks.
Moreover, you can preset a listening mode, specify names for display, adjust audio delays, correct the difference in the
volume level from other input sources, and set the 12V trigger.
In particular, please be careful when setting the input jacks. Please properly specify settings for correct selection of
pictures and audio to be played by referring to the information you wrote down in the Your System Settings booklet.
In the case of NET AUDIO, you can specify settings for the server (See page 95).
Settings defaults are as follows:
Note:
Defaults may differ depending on your region or option board in use.
OSD Indication
Audio Assign
Video Assign
Analog Audio Multichannel Digital Audio
i.LINK
Composite
Video
S-Video
Component
Video
HDMI
Name of Terminal
to be Set
AUDIO IN
MULTI-CH
IN
DIGITAL IN
iLINK
VIDEO IN
S VIDEO IN
COMPONENT
VIDEO IN
HDMI IN
NET AUDIO
No
No
No
No
Last
Last
Last
Last
CD
1
2
Opt 2
No
Last
Last
Last
Last
PHONO
Phono
No
No
No
Last
Last
Last
Last
TUNER
No
No
No
No
Last
Last
Last
Last
TAPE 1
2
No
Opt 3
No
Last
Last
Last
Last
TAPE 2
3
No
Coax 1
No
Last
Last
Last
Last
DVD
4
1
Opt 1
No
1
1
RCA 1
HDMI 1
VIDEO 1
5
No
Coax 2
No
2
2
RCA 2
HDMI 2
VIDEO 2
6
No
Coax 3
No
3
3
RCA 3
Video
VIDEO 3
7
No
Opt 4
No
4
4
RCA 4/BNC
Video
VIDEO 4
8
No
Opt 5
No
5
No
No
Video
VIDEO 5
9
No
Coax 4
No
6
No
No
Video
VIDEO 6
No
No
Coax 5
No
No
5
No
Video
VIDEO 7
Front
No
Front Opt
No
Front
Front
No
Video
Input Selector