Icom IC-718 - Manual (Page 21)

19
4
FREQUENCY SETTING
10 Hz tuning
1 Hz tuning
momentarily
1 sec. 1 sec.
1 sec.
Programmable step tuning
(100 Hz –100 kHz)
Selectable for each mode.
momentarily
[TS] SWITCH FLOW CHART
n Dial lock function
The dial lock function prevents accidental changes
caused by the tuning dial. The lock function
electronically locks the dial.
Push [LOCK] momentarily to toggle the lock function
ON and OFF.
• “LOCK” appears in the function display while the lock
function is activated.
“LOCK” appears while the lock
function is activated.
D 1 Hz and 10 Hz tuning steps
When the programmable tuning step, “,” disappear,
rotating the tuning dial changes the frequency in
increments of 1 or 10 Hz.
q Push [TS] one or more times until the programmable
tuning step indicator “” disappears.
w Push [TS] for 1 sec. to toggle between the 1 and
10 Hz step settings.
• When the 1 Hz step is selected, the 1 Hz digit
appears in the frequency indication; when the 10 Hz
step is selected, the 1 Hz digit disappears from the
frequency indication.
TS
Rotating the tuning dial
changes the frequency
in 10 Hz steps.
Rotating the tuning dial
changes the frequency
in 1 Hz steps.
Push for 1 sec.