Nprogrammed scan operation – Icom IC-718 User Manual
Page 42
7
SCANS
40
n
Programmed scan operation
q
Select VFO mode with [V/M].
w
Select the desired operating mode.
• The operating mode can also be changed while
scanning.
e
Set [RF/SQL] open or closed.
• See previous page for scan condition.
• If the [RF/SQL] control function is set as RF control,
the squelch always opens. See pgs. 15, 20 for details.
r
Push [SCAN] to start the programmed scan.
• “SCAN” appears while scanning.
t
When the scan detects a signal, the scan stops,
pauses or ignores it depending on the resume
setting and the squelch condition.
y
To cancel the scan, push [SCAN].
If the same frequencies are programmed into the
s c a n e d g e m e m o r y c h a n n e l P 1 a n d P 2 ,
programmed scan does not start.
n
Memory scan operation
q
Select memory mode with [V/M].
w
Select the desired operating mode.
• The operating mode can also be changed while
scanning.
e
Set [RF/SQL] open or closed.
• See previous page for scan condition.
• If the [RF/SQL] control function is set as RF control,
the squelch always opens. See pgs. 14, 30 for details.
r
Push [SCAN] to start the memory scan.
• “SCAN” appears while scanning.
t
When the scan detects a signal, the scan stops,
pauses or ignores it depending on the resume
setting and the squelch condition.
y
To cancel the scan, push [SCAN].
2 or more memory channels must be programmed
for memory scan to start.