Icom IC-718 - Manual (Page 39)

6
MEMORY OPERATION
37
n Frequency transferring
The frequency and operating mode in a memory
channel can be transferred to the VFO. Frequency transferring can be performed in either
VFO mode or memory mode.
D Transferring in VFO mode
This is useful for transferring programmed contents
to VFO.
q Select VFO mode with [V/M].
w Push [CH], then select the memory channel to be
transferred with [UP Y] or [Z DN].
• “BLANK” appears if the selected memory channel is a
blank channel.
e Push [M ≈ V] for 1 sec. to transfer the frequency
and operating mode.
• Transferred frequency and operating mode appear on
the frequency readout.
r Push [CH] to exit memory channel select mode.
TRANSFERRING EXAMPLE IN VFO MODE
Operating frequency
: 21.320 MHz/USB (VFO)
Contents of M-ch 12 : 14.180 MHz/CW
UP DN or
CH
Push for 1 sec.
Beep
Beep
Beep
M V
6
Y
CH
Z Y