IBM R/S Rheometer M/02-212 - Manual (Page 43)

Brookfield Engineering Labs., Inc. Page 43 M/02-212
If you have chosen the output device, you have to select the measuring series to transfer. All available
data is displayed in a list.
After selection of a measurement series, the data of the series will be printed as Table or transferred via
the serial interface.
After completion of data transfer the Rheometer returns to Utilities Menue.
VI.6.6 Utilities → Clear memory
This function deletes all measured data stored in the memory of the R/S-CPS Rheometer.
Before deleting, please ensure that the measurement data have been archived on printer or PC. (see
Print Memory, the last chapter).
Before the final deleting from the memory the following security request is indicated:
If you select “YES” entry, the memory of measuring results will be erased, otherwise you will return back
to the Menue without deleting.
VI.6.7 Utilities → Measure temperature
This function serves measurement of temperature with the temperature sensor, connected to the
Rheometer.
After starting this function, permanent temperature measurement is performed:
Pressing key you return back to Utilities-Menue
.
Select Program:
- 1;17.10;11:20
- 2;17.10;12:30
- 3;17.10;13:40
Clear Memory?
- NO
- YES
Temperature:
20.5 °C
<OK> return
Meas. series counter MEASCOUNT
Date of measurement
Time of measurement
OK