Iomega 03798300 - Manual (Page 19)

19
Installation
Guide
Slide the Zip ® drive into the drive bay.
˾ NOTE:
If it makes it easier to connect cables on your computer,
you can secure the Zip ® drive in the drive bay now. (See step 9 for
instructions on securing the drive.)
˾
Locate the data cable that comes packaged
with the Zip
® drive. Find the colored stripe or
print on one side of the data cable showing
PIN 1.
Stripe or printing shows the
PIN 1 side of the data cable.
Locate the PIN 1 connection on the IDE channel. PIN 1 on your
computer’s IDE channels can be indicated by any of the following marks.
If you have a keyed receptacle, you should only be able to connect the cable
one way.
1
2 40
39
Keyed
Connector
4
5