Iomega 03798300 - Manual (Page 20)

20
Installation
Guide
Connect the data cable to the secondary IDE
channel on the motherboard.
(Be sure PIN 1 on
the cable is connected to PIN 1 on the motherboard.)
PIN 1
to PIN 1
Connect the other end of the data cable to the
Zip
® drive.
CAUTION Make sure PIN 1 on the cable connects to PIN 1 on the
Zip ® Internal drive. All IDE interface cable connections must maintain
correct PIN 1 orientation in order for the Zip ® drive to be recognized
by the system.
˾
PIN
1
Zip Internal drive
PIN 1
40-pin Interface Cable Connector
Stripe on Interface Cable indicates PIN 1
6
7