IBM Print System QMS 4032 - Manual (Page 49)

82 
 
 ' '
 ' ' /'7"  

  '  
  
 
Indicator Off On
The printer is not receiving data The printer is receiving data
through one or more of the
interfaces.
No problem. The printer is accessing the
internal or external hard disk (if
installed).
No problem. The printer requires operator
attention—see the status
message.
The printer is off line and not
ready to accept data. The printer is on line and ready
to accept data
Button Function
The Online button switches the printer between on-line to
off-line status. When off line, the printer continues printing
until it has finished all jobs received, but it doesn’t accept
any new data. Although jobs continue to compile and print
using the data already received, a job may be interrupted.
If a remote console has taken the printer off line, pressing
the Online button on the control panel will not take effect
until the console puts the printer back on line.
» Note: You must take the printer off line before using all
other buttons except the Cancel, Print Statistics, and
Print Status buttons.
The Print Statistics button allows you to print a special
page that shows the statistics of printer supplies like toner
and paper.