IBM Print System QMS 4032 - Manual (Page 55)

82 
 
 ' '
 ' ' /'7"  
.
%/ &
To change the HP-GL emulation scaling percent, press the control panel buttons in
the order shown in the following table. The printer responds by displaying a status
message or configuration menu in the message window. An underline indicates the
current input character in the message window.
» Note: You may need to press the Next button more than once to advance through the
list of selections or options.
Press this button to... The message window
reads...
Online Turn off the Online indicator and
readies the printer for configuration. IDLE
Menu Access the configuration menu. CONFIGURATION
OPERATOR CONTROL
Next Advance to the Administration menu. CONFIGURATION
ADMINISTRATION
Select Access the Administration menu ADMINISTRATION
COMMUNICATIONS
Next Advance to the Emulation menu. ADMINISTRATION
EMULATIONS
Select Access the Emulations menu. EMULATIONS
ESP DEFAULT EMUL
Next Advance to the Emulations/HP-GL
menu. EMULATIONS
HP-GL
Select Access the HP-GL menu. HP-GL
PLOTTER
Next Advance to the HP-GL/Scaling Percent
menu. HP-GL
SCALING PERCENT
Select Access the Scaling Percent menu. SCALING PERCENT
100
Previous Lower the current character to 0. SCALING PERCENT
000