IBM SCOD-3ZVQ5W - Manual (Page 323)

Chapter 25. BladeCenter ® chassis 8677 315
Notes:
1.
This cable is 1.5m in length and provides four connections between the optical pass-thru-module (OPM)
and an external Ethernet or fibre environment.
2. Provides five copper connections between the copper pass-thru module (CPM) and an external gigabit
Ethernet environment. A maximum of 14 connections per CPM is supported. One CPM cable ships with
the CPM option. Two additional cables can be installed.
3. Option 39Y9170 cannot be installed by manufacturing. It must be shipped separately, as an accessory.
Figure 67. IBM BladeCenter Copper Pass-thru Module Cable
This IBM BladeCenter option provides connection between the copper pass-thru module and an external
environment. This cable allows up to five copper connections to blade servers. One of these cables included
with each copper pass-thru module. Cable is 3.1m (9.4ft) in length.
39Y9331 39Y9170 4366 IBM eServer
BladeCenter Copper
Pass-thru Module
Cable Multiport
Copper
CAT 5E
Copper
Connections
5 CPM
switch
Network
32R1849 26R0847 4294 InfiniBand 8 meter 4x
Cable for IBM eServer
BladeCenter InfiniBand 4x
InfiniBand
1 IB 4x
connector
IB Fabric
32R1850 26R0849 4295 InfiniBand 8 meter 12 to
(3) 4x Cable for IBM
eServer BladeCenter InfiniBand 4x
InfiniBand
3 IB 12x
connector
IB Fabric
32R1938 32R1937 4362 IBM CX4 1.5 Meter
Cable CX4
Connector
CX4
Connector
1 10Gb
ESM CX4
Port
Another
Nortel 10Gb
ESM or
external
10Gb switch
with CX4
ports.
32R1942 32R1941 4363 IBM CX4 3.0 Meter
Cable CX4
Connector
CX4
Connector
1 10Gb
ESM CX4
Port
Another
Nortel 10Gb
ESM or
external
10Gb switch
with CX4
ports.
SBB
Number
Option
Number
Feature
Code Description
Connection
Type From
Connection
Type To
# of
Drops
Connects
From
Connects
To