Integra DPS-7.2 - Manual (Page 11)

11
SN 29343135 DPS-7.2E
■ Rear panel
■ Display
TITLE GROUP CHAPTER TRACK REMAIN
LAST
COND. D.MIX
DTS
REPEAT DVD - AUDIO V C D
D
GUI
R LFE C L
RS LS
1 2 3 4 5 6 7 9 0
! ~ = -
8
AC INLET
Y P B P R
COMPONENT
VIDEO
S VIDEO
OPTICAL COAXIAL
REMOTE
CONTROL
DIGITAL OUTPUT
CH 1 CH 2 FRONT SURR CENTER
SUB
WOOFER
VIDEO OUTPUT ANALOG OUTPUT
L
R
CH1
CH2
RS-232
DVD AUDIO/VIDEO PLAYER
MODEL NO. DPS-7.2
1 4 3 2 5 6 7 8 9 0
1 £/8 indicator
2 Inserted disc indicator
3 TITLE/GROUP indicator
4 Angle icon indicator
5 CHAPTER/TRACK indicator
6 REPEAT indicator
7 REMAIN indicator
8 L, C, R, LS, RS, LFE and D.MIX indicator
9 LAST indicator
0 COND. indicator
-
ŸD indicator
= DTS indicator
~ GUI indicator
! Multifunctional indicator
(e.g. operating status and error messages)
1 VIDEO OUTPUT COMPONENT CH 1/CH 2 jacks [14]
If your TV or monitor has component video inputs, you can
produce a higher quality picture on your TV or monitor by
connecting to the component video outputs on this unit.
2 RS-232 port
This port is to be used in conjunction with an external controller to
control the operation of the DPS-7.2 using an external device.
3 VIDEO OUTPUT VIDEO jack [13]
Connect to the video input on a TV or monitor or AV amplifier or
receiver with video input capability.
4 VIDEO OUTPUT S VIDEO jack [14]
If your TV or monitor has an S-video input, clear picture
reproduction is possible by connecting the player to your TV or
monitor via the S-Video jack.
You can switch between [S1] and [S2] S-video output from the
Setup menu.
5 ANALOG OUTPUT CH 1/CH 2 jacks [13, 14]
Use to output two-channel audio (analog) to the audio stereo
inputs on a TV or stereo amplifier.
6 ANALOG OUTPUT FRONT/SURR/CENTER/
SUBWOOFER jacks [15]
Use to output 5.1 channel audio (analog) to the 5.1 channel
discrete inputs on an amplifier. If you are connecting to a receiver
that has both digital and analog input jacks for DVD player
connection, it may be beneficial to make both connections.
7 DIGITAL OUTPUT OPTICAL jack [15]
Use to output the digital audio signal recorded on discs. You can
output the digital signal via the optical output jack to an AV
amplifier or receiver.
8 DIGITAL OUTPUT COAXIAL jack [15]
Use to output the digital audio signal recorded on discs. You can
output the digital signal via the coaxial output jack to an AV
amplifier or receiver.
9 z jack [15]
Use to connect this player to another component bearing the z
mark. This lets you control this unit as though it were a
component in a system.
0 AC INLET [16]
Use to connect the power cord to the wall outlet.