Integra DPS-7.2 - Manual (Page 38)

38
SN 29343135 DPS-7.2E
Turning Off the Video Signal Output
The DVD Player can be set playing audio exclusively. In
this case, you can obtain sound of better quality, as the
DVD Player does not process video signals. (All the
video output jacks send no video signals.)
Notes
• Some discs cannot be played without some on-screen menu
interaction. If this is the case, be sure to perform the on-screen
procedures as indicated before turning off the video signal
processing circuitry.
• The Video Circuit Off setting is canceled whenever the DVD
Player is turned off.
Video Circuit
Off
DVD VCD CD MP3
Display Setup
Menu Top Menu
Return
Push to Enter
Cursor Clear
192/176.4 Sampling Rate (kHz)
96/88.2
48/44.1
Random
Last Memory Video Circuit Off
Repeat Dimmer
Play Stop
Phones Level Phones
Pause Open /Close
DPS-7.2
Standby/On
Standby
On O f f
Power
Max Min
Video Circuit Off
Switching the video signal off
Press Video Circuit Off on the DVD
Player repeatedly.
The Video Circuit Off indicator lights up.
To turn on the video circuitry, press the
button again.