Intel SBC-455 - Manual (Page 47)

Chapter 3 AMI WinBIOS setup 39
Floppy A, Floppy B
Select these icons to configure the type of floppy drive that is
attached to the system: 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB 3 1/2",
1.44 MB 3 1/2", and/or 2.88 MB 3 1/2". The settings have not been
pre-installed.
User-Defined Drive
If you are configuring a SCSI drive or an MFM, RLL, ARLL, or
ESDI drive with drive parameters that do not match drive types 1-
46, you can select the User in the Type field. You must then enter
the drive parameters on the screen that appears. The drive parame-
ters include:
• Cylinder (number of cylinders),
• Hd (number of headers),
• WP(starting write precompensation cylinder),
• Sec (number of sectors),
• Size (drive capacity).