Peripheral setup – Intel SBC-455 User Manual
Page 61
Advertising
Chapter 3 AMI WinBIOS
setup 53
Onboard FDC
This option enables the floppy drive controller on the motherboard.
The settings are Auto, Enabled or Disabled.
Onboard Serial Port 1
This option enables serial port 1 on the motherboard and
specifies the base I/O port address for serial port 1.
The settings are Auto, Disabled, 3F8h, 3E8h, 2E8h,2F8h. The
Fail-Safe default setting is Auto.
Peripheral Setup
Peripheral Setup options are displayed by choosing the Peripheral
Setup icon from the WINBIOS Setup main menu. All Peripheral
Setup options are described in this section:
Advertising