Intel SBC-455 - Manual (Page 74)

66 PCM-5890 User's Manual
Windows Ф Ф Ф Ф Ф 95
These drivers are designed to work with Microsonft Ò Windows Ô.
You just install these drivers through the Windows Ô operating
system.
Driver installation
2. Place the Windows Ô 95 Display Driver Diskette in drive A. In
the Select Device window, click on Have Disk, Press <EN-
TER> and the name of the Chips and Technologies, Inc. Video
Controller driver will appear highlighted in the Models list box.
Select Chips and Tech. 65548 PCI(new) and Click OK to install
the selected driver. Click OK to install the selected driver.
3. Once the installation is complete, the Change Display Type
window will reappear. Click on Close to close the window. Then
the Display Properties window will reappear. Click on Apply.
Restart the system for new settings to take effect.
1. Install Windows Ô 95 as you normally would for a VGA
display. Click the Start button, go to Settings and click on
Control Panel. Choose the Display icon and double click on
the icon. In the Display Properties window, click on the
Settings tab. Then click on Change Display type. In the
Change Display Type window, click on the Change button
under Adapter Type. This will bring up the Select Device
window.