Inter-Tel INT1100 - Manual (Page 10)

[ 10 ] G E T T I N G S T A R T E D
Battery use time (per charge)
Fully charged (15-20 hours charge time)
• Up to 4 hours continuous use
• Up to 8 days when the handset is in the standby mode
Cleaning the battery charging contacts
To maintain a good charge, it is important to clean the
charging contacts on both the handset and base unit
once a month. Use a dry cloth or pencil eraser to
clean. If the contacts become very dirty, using water
only, dampen a cloth to clean the charging contacts.
Then make sure to go back over the charging contacts
with a dry cloth before returning the handset to the
base to charge.
contacts
When you charge the handset, Caller ID summary screen and the name
of the handset,
HS1 appears. For TRU5860-2, if HS2 appears, you are
charging the handset No. 2.
The last number dialed in the redial memory is retained for up to
2 minutes while you replace the battery pack.
Low battery alert
When the battery pack is very low and needs to be charged, the
phone is programmed to eliminate functions in order to save power.
If the phone is in the standby mode, ”
Low Battery ” appears on
the LCD and none of the keys will operate. If the phone is in use,
”
Low Battery ” appears and the handset beeps. Complete your
conversation as quickly as possible and return the handset to the
base unit for charging.
INT1100 Manual-5.0.qxd 1/29/04 12:09 AM Page 10 Bob's Garage: New Backup: Clients:CoastlineCreative:Clients:Int