Inter-Tel INT1100 - Manual (Page 13)

[ 13 ]
GETTING ST
AR
TED
G E T T I N G S T A R T E D
To change your Caller ID options:
1) When the phone is in the standby mode, press menu/mute.
2) Press + or - to move the pointer to “ Caller ID Setup ”, then
press select/ch.
3) Press + or - to choose “ Auto Talk ” or “ CIDCW ”,
then press select/ch.
4) Press + or - to change the selection.
AutoTalk: “ Auto Talk On ” or “ Auto Talk Off ”
CIDCW: “ CIDCW On ”, “ CW Deluxe On ” or “ CIDCW Off ”
5) Press select/ch and you will hear a confirmation tone.
6) Press end to exit.
Setting Caller ID Options
There are three Caller ID setup options available: AutoTalk, CIDCW (Caller ID on Call Waiting),
and Area Code. See page 14 for Area Code setup instructions.
AutoTalk allows you to answer the phone without pressing talk/flash or spkr. If the phone rings
when AutoTalk is On, simply remove the handset from the base and the phone automatically
answers the call. Or if the handset is not in the base, press any number key,
/tone, or # to
answer the call. If you set AutoTalk to Off, you must press talk/flash or spkr to answer the call.
Caller ID on Call Waiting (CIDCW) performs the same as regular Caller ID on a call waiting
number. CW Deluxe allows you to handle call waiting calls in seven different ways. (See page 36.)
You must subscribe to CIDCW from your phone company in order to use this feature.
The CW Deluxe is a separate service available through your phone company.
INT1100 Manual-5.0.qxd 1/29/04 12:09 AM Page 13 Bob's Garage: New Backup: Clients:CoastlineCreative:Clients:Int