Inter-Tel INT1100 - Manual (Page 22)

[ 22 ] B A S I C S
• If the handset battery is
completely drained, the
handset will not beep
when paging.
Find Handset
To locate the handset, press find handset on the base when the
base is in the standby mode. The handset beeps for 60 seconds,
and “ Paging ” appears on the handset display.
Paging is canceled when pressing any key on the handset or
find handset on the base. Additionally, if you receive an incoming
call, page is canceled.
Flash and Call Waiting
If you have Call Waiting service and a call waiting tone sounds while
you are on a call, press talk/flash to accept the waiting call. There is
a short pause, then you will hear the new caller. To return to the
original caller, press talk/flash again.
You must subscribe
through your local
telephone company
to receive Call
Waiting Service.
Voice Mail LED
The voice mail LED on the handset is designed to work with your
voice mail service provided by your local telephone company. The LED
flashes when you have new messages in your voice mail box.
You may need to occasionally reset the indicator if it remains On
after you’ve retrieved your messages. To reset the indicator, when the
phone is in the standby mode, press and hold find handset on the
base until the paging sound stops (about 5 seconds).
INT1100 Manual-5.0.qxd 1/29/04 12:09 AM Page 22 Bob's Garage: New Backup: Clients:CoastlineCreative:Clients:Int