Inter-Tel INT1100 - Manual (Page 16)

[ 16 ]
On the handset, you may also use the speakerphone while talking on your phone. Using
the handset speakerphone is called “hands-free conversation”. This feature allows you to
easily communicate while performing other tasks, such as cooking.
appears during
hands-free conversation.
You can easily switch a call from normal conversation to “hands-free conversation”.
To switch a call, press spkr during the call.
B A S I C S
Making and Receiving Calls
• Refer to page 13
“Setting Caller ID
Options” to turn the
AutoTalk feature On if
desired. Any key answer
can be used only when
AutoTalk is set to On.
• The handset microphone
is located on the bottom
of the handset (see
“Controls and Functions”
on page 5). Position
yourself as near to the
handset as possible and
speak clearly.
To answer a call
To make a call
Normal conversation
Handset On the Base
Pick up the handset (AutoTalk) or pick up
the handset and press talk/flash.
Handset Off the Base
Press any number key,
/tone, or #
(Any Key Answer), or press talk/flash.
Handset Off the Base
1) Press talk/flash.
2) Listen for the dial tone.
3) Dial the number.
OR
Dial the number, then press talk/flash.
Note: If a call is not established, you will hear a beep and “ Unavailable ” will
appear in the display.
Press end, or return the handset to the base (AutoStandby).
When you dial the number, press redial/p.
“
P ” appears in the display, which represents a pause.
Hands-free conversation
Handset Off the Base
Press spkr.
Handset Off the Base
1) Press spkr.
2) Listen for the dial tone.
3) Dial the number.
OR
Dial the number, then press spkr.
From the Handset
To hang up
To enter a pause within
the dialing sequence
INT1100 Manual-5.0.qxd 1/29/04 12:09 AM Page 16 Bob's Garage: New Backup: Clients:CoastlineCreative:Clients:Int