Intel ECB-870 User Manual
Page 85
Advertising
ECB-870
ECB-870 User’s Manual 73
•
If the ‘Network adapters’ line is present, expand the line and remove the PCI
Ethernet Adapter. This is done by selecting the line and clicking the ‘Remove’
button. Before removal of the adapter(s), your screen might look like this:
•
When all adapters are removed (or none were present), a new driver can be
installed now.
2. Reboot the computer.
3. During the boot up the network adapter should be detected as shown below. Click the
‘Next’ button.
Advertising