Janome MB-4 - Manual (Page 27)

24
Use the sub control panel to operate the machine
without the RCS unit.
Function buttons
q MODE button
Press this button to select one of the following
modes.
1. Ready to Sew
2. Stitch count setting
3. Color section setting
4. Needle bar number setting
5. Pattern selection
6. My setting
w Trace button
Press this button to trace the outline of the
embroidery pattern without stitching.
e Arrow buttons
These buttons can be used as Jog buttons in the
Ready to Sew mode.
In other modes, these button are used for selecting
the items.
r ENTER button
Press this button to confirm your selection or register
the settings.
t LCD brightness adjusting dial
Turn this dial with your fingertip to adjust the
brightness of the LCD screen.
q
w
e
r
t
q
w
e
r
t
SECTION 2. BASIC OPERATION
Basic Operation with the Sub Control Panel
Machine operating buttons
q Start/Stop button
Press this button to start or stop the machine.
The button glows red when the machine is stitching,
and green, when the machine has stopped.
w Auto thread cutter button
Press this button to trim the threads.
e Bobbin winding button
Press this button to wind the bobbin.
q
w
e