Janome MB-4 - Manual (Page 39)

36
1
5
9
6
10
7
11
8
12
2 3 4
Keep hand clear.
Garriage will now move to set position.
Do you resume the last settings?
SECTION 3. ADVANCED OPERATION
WITH THE OPTIONAL RCS UNIT
Selecting the Embroidery Patterns
When turning the power on, the LCD touch panel will
show the opening window, then a warning message
will appear after a few seconds.
Press the OK key and the carriage will move to the
home position. Keep your hands clear of the moving
parts.
q OK key
The LCD touch panel will show a prompt asking you
to resume the last settings or not.
Press the OK key, if you wish to continue sewing the
last pattern used before you turned the power off.
Or press the exit (X) key to start a new job.
w Exit key (X)
When you press the exit (X) key, the LCD touch panel
will show the pattern selection window of the built-in
designs.
To select the monogramming or editing mode, press
the circle key next to the monogram or editing icon.
e Circle key (monogramming)
r Circle key (editing)
In the monogramming mode, you can select 10 styles
of font, 2-letters, 3-letters and border patterns.
In the editing mode, you can modify and combine
embroidery patterns imported from various sources
including the built-in designs, PC-Design cards,
CD-ROM and free design form Internet.
q
w
e r
q