Janome MB-4 - Manual (Page 67)

64
Format
RCS
USB Memory
ATA PC Card
MB-4
Reset all to defaults
Yes
3
Format
RCS
USB Memory
ATA PC Card
MB-4
Reset all to defaults
Yes
3
Format
RCS
USB Memory
ATA PC Card
MB-4
Reset all to defaults
Yes
3
Format
RCS
USB Memory
ATA PC Card
MB-4
Reset all to defaults
Yes
3
Format
RCS
USB Memory
ATA PC Card
MB-4
Reset all to defaults
Yes
3
Format memory?
All the stored data will be erased.
RCS
, Formatting the memory
If the internal memory or media does not function due
to damage to the memory bank, you need to re-enable
it by formatting the memory.
Press the arrow key (up or down) to select the
desired memory location.
Press the circle key next to “Yes” and the
confirmation message will appear.
Press the OK key to format the memory. If you do not
wish to format, press the exit key.
q Arrow keys (up, down)
w Circle key (Yes)
e OK key
r Exit key (X)
t Confirmation dialog box
NOTE:
If you format all the data stored in the memory will be
erased and cannot be restored. You are
recommended to save the data in other memory
location before formatting.
. Resetting all to defaults
All the parameters in the setting mode, except for the
language, will be reset to the original values (factory
setting) by pressing the circle key next to “Yes”.
w Circle key (Yes)
Press the OK key to register the new settings.
Or press the next page key to go to the next page.
q w
e r
t
,
.
w