JVC HR-J449MS - Manual (Page 10)

10
D
SOR
INSTALLING YOUR NEW RECORDER
Basic Connections
It's essential that your video recorder be properly connected.
Follow these steps carefully. THESE STEPS MUST BE COMPLETED
BEFORE ANY VIDEO OPERATION CAN BE PERFORMED.
CHECK CONTENTS
1
Make sure the package contains all of the accessories
listed in “Specifications” (
੬
pg. 55).
SITUATE RECORDER
2
Place the recorder on a stable, horizontal surface.
CONNECT RECORDER TO
TV
3
a– Disconnect the TV aerial cable from the TV.
b– Connect the TV aerial cable to the ENTREE
ANTENNE jack on the rear panel of the recorder.
c– Connect the provided RF cable between the SORTIE
ANTENNE jack on the rear panel of the recorder and
the TV’s aerial terminal with the provided antenna
adapter directly connected to the TV as illustrated.
d– Connect the provided SCART cable between the
AV1 ENTREE/SORTIE socket on the rear panel of the
recorder and the TV’s 21-pin SCART connector.
Before operating the recorder, make sure the TV
is set to the VIDEO (or AV) mode.
CONNECT RECORDER TO
MAINS
4
Plug the end of the mains power cord into a mains
outlet.
Aerial terminal
21-pin SCART connector
21-pin SCART Cable (provided)
Antenna adapter (provided)
RF Cable (provided)
Back of TV
Mains Power
Cord
Mains outlet
21
(no