Connection to a stereo system (hr-j746ms only), Make connections, Installing your new recorder (cont'd) – JVC HR-J449MS User Manual
Page 12
12
AV1 ENTREE / SORTIE
AV2 ENTREE / DECODEUR
SORTIE
ENTREE
ANTENNE
D
G
SORTIE AUDIO
TELEC.
Connection To
A Stereo
System
(HR-J746MS
Only)
These instructions enable you to connect your video recorder to
your Hi-Fi stereo system (if you have one) and listen to the
soundtrack through the stereo.
MAKE CONNECTIONS
1
Connect the AUDIO OUT L and R connectors on your
video recorder to the AUX IN or TAPE MONITOR
terminals on your stereo system's receiver or amplifier.
INSTALLING YOUR NEW RECORDER (cont'd)
NOTES:
●
When connecting your recorder's audio output connectors to
a stereo amplifier, make sure you connect L and R correctly.
●
If NICAM or A2 TV broadcasts are receivable in your area,
this recorder can record them independently of the TV set and
play them back through the connected stereo system.
●
When listening to sound through the connected stereo system,
turn the TV's volume down completely.
Back of Recorder
Audio Cable (not provided)
Mains outlet
AUDIO OUT