JVC HR-J449MS - Manual (Page 48)

48
EDITING
Edit To Or
From Another
Video
Recorder
You can use your video recorder as the source player or the
recording deck.
MAKE CONNECTIONS
1
Connect the player’s 21-pin SCART connector to the
recorder’s 21-pin SCART connector as shown in the
illustration on page 49.
When Using Your Video Recorder As The Source
Player . . .
. . . connect its AV1 ENTREE/SORTIE connector to the
recording deck.
When Using Your Video Recorder As The Recording
Deck . . .
. . . . connect its AV2 ENTREE/DECODEUR connector to
the source player.
● Set "SELECTION AV2" to "AUX" ( ੬
pg. 49).
SET RECORDING DECK’S
INPUT MODE
2
Set to AUX. With this video recorder, press NUMBER
key "0" and/or CHAINE to select “AU-2” for the AV2
ENTREE/DECODEUR connector.
START SOURCE PLAYER
3
Engage its Play mode.
START RECORDING DECK
4
Engage its Record mode.
NOTE:
All necessary cables can be obtained from your dealer.
1 2
4 5
3
6
8
0
7 9
2
4
1
3
CHAINE
NUMBER "0"
IMPORTANT
Before you start editing, be sure to select the appropriate colour
system by pressing SYSTEME COULEUR depending on the
system of the connected recorder or camcorder.
੬
pg. 51