JVC HR-J449MS - Manual (Page 46)

46
TIMER RECORDING(cont.)
1 2
4 5
3
6
8
0
7 9
2
4
1
3
ANNUL.
CHAINE
DATE
DEBUT
FIN
CONTROLE PROG.
Auto Timer
When the Auto Timer is set to ON the timer is automatically
engaged when the recorder power is turned off and automati-
cally disengaged when the recorder is powered back on.
ACCESS MENU PRINCIPAL
SCREEN
1
Press MENU twice.
ACCESS AUTRES
REGLAGES SCREEN
2
Press MULTI-FONCTIONS
%fi to move the highlight
bar (pointer) to "AUTRES
REGLAGES", then press
OK.
SELECT MODE
3
Press MULTI-
FONCTIONS to select
either "M." or "A.".
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTE:
For safety, when Auto timer is set to "A.", all other recorder
functions are disabled while the Timer mode is engaged. To
disengage the timer, press AUTO.
Check And Cancel
Programmes
ACCESS PROGRAMME
SCREEN AND/OR DISPLAY
1
Press CONTROLE PROG.
● The display panel shows the programme start time.
Pressing OK changes the display to the programme
stop time, then the date and channel.
● If the recorder is turned on and the TV is set to its AV
mode, you can check program information on screen
as well.
● Each time you press CONTROLE PROG., the next
programme's information appears.
If All Information Is Correct . . .
. . . programming is completed.
If You Wish To Revise Data . . .
. . . with the recorder's power turned on, go to step 2.
If You Wish To Cancel A Program . . .
. . . with the recorder's power turned on, press ANNUL.
All information you input is deleted.
REVISE PROGRAMME
INFORMATION
2
Input the appropriate data using the DEBUT +/–, FIN +/–,
DATE +/– and CHAINE +/– buttons on the remote control.
MENU PRINCIPAL
AUTRES REGLAGES
REGL. AUTO. DES CANAUX
REGL. MANUEL CANAUX
REGL. DES NUMEROS GUIDE
REGLAGE DE L'HORLOGE
[ 5∞] =
[MENU] : SORTIE
5
%
OK
MULTI-FONCTIONS
AUTRES REGLAGES
ENR. PROG. AUTO : M.
O.S.D. : M.
B.E.S.T. : M.
SELECTION AV2 : AUX.
[ 5∞] = [ ] : M./A.
[MENU] : SORTIE
MENU