JVC HR-J449MS - Manual (Page 39)

39
Recording
Features
Record One Programme
While Watching Another
SELECT PRESET TO WATCH
1
Once recording is in progress, all you need to do is to
set the preset controls on the TV for the station you
wish to view.
● The programme selected with the TV’s preset controls
appears on the TV screen while the one selected with
the CHAINE buttons is recorded on the tape.
Elapsed Recording Time
Indication
You can check the exact time of a recording.
SET COUNTER DISPLAY
1
Press AFFICHAGE until a counter reading appears on
the dispay panel.
RESET COUNTER
2
Press 0000 before starting recording or playback.
● The counter is reset to “0:00:00” and shows the exact
elapsed time as the tape runs.
Tape Remaining Time
DISPLAY REMAINING TIME
1
Press AFFICHAGE until the time remaining on the tape
appears.
● By pressing the AFFICHAGE button, you can change
the display to show the counter reading, tape
remaining time, or clock time.
NOTE:
Depending on the type of tape used, there may be times when
the tape remaining time reading may not appear right away, or
is not correct. "- - : - -" may sometimes appear, or the display
may blink on occasion.
1 2
4 5
3
6
8
0
7 9
2
4
1
3
CHAINE
MULTI-FONCTIONS
AFFICHAGE
0000