JVC VN-V686UAPI - Manual (Page 26)

Interpretation Acquire B&W mode. "color", "bw", "autoL", "autoM" or "autoH" is returned.
Allowed users admin, operator, user
Setting B&W Mode for VN-V686
Format /api/param?camera.image.true_daynight=data
Example /api/param?camera.image.true_daynight=autoM
Example of response
camera.image.true_daynight &202 Accepted(camera.status=save)
Interpretation Change B&W mode. Specify "color", "bw", "autoL", "autoM" or "autoH". IR filter is on when
"color" is set. IR filter is off when "bw" is set. IR filter is operated dynamically according to image brightness after
autoL/autoM/autoH is set. The change is saved by the API, camera.status=save. If the change is not saved, the setting
is restored by reboot.
Allowed users admin, operator
Getting Auto Focus mode for B&W switching from VN-V686
Format /api/param?camera.image.true_daynight.af
Example of response camera.image.true_daynight.af=on&200 OK
Interpretation Acquire auto focus mode for B&W switching. "on" or "off" is returned. When the setting is "on",
auto focus works when B&W mode is switched.
Allowed users admin, operator, user
Setting Auto Focus mode for B&W switching for VN-V686
Format /api/param?camera.image.true_daynight.af=data
Example /api/param?camera.image.true_daynight.af=on
Example of response
camera.image.true_daynight.af &202 Accepted(camera.status=save)
Interpretation Change auto focus mode for B&W switching. Specify "on" or "off". When the setting is "on", auto
focus works when B&W mode is switched. The change is saved by the API, camera.status=save. If the change is not
saved, the setting is restored by reboot.
Allowed users admin, operator
Getting Light setting for focus in B&W mode from VN-V686
Format /api/param?camera.image.true_daynight.light
Example of response camera.image.true_daynight.light=normal&200 OK
Interpretation Acquire light setting for focus in B&W mode. "normal" or "infrared" is returned. When the setting
is "infrared", focus at zooming works correctly with infrared light in B&W mode.
26