JVC VN-V686UAPI - Manual (Page 27)

Allowed users admin, operator, user
Setting Light for focus in B&W mode for VN-V686
Format /api/param?camera.image.true_daynight.light=data
Example /api/param?camera.image.true_daynight.af=infrared
Example of response
camera.image.true_daynight.light &202 Accepted(camera.status=save)
Interpretation Change light setting for focus in B&W mode. Specify "normal" or "infrared". When the setting is
"infrared", focus at zooming works correctly with infrared light in B&W mode. The change is saved by the API,
camera.status=save. If the change is not saved, the setting is restored by reboot.
Allowed users admin, operator
Saving Image Settings for Auto Pan and Auto Trace
Format /api/param?canera.motion.auto_pan.image=save
/api/param?canera.motion.auto_trace.image=save
Example of response canera.motion.auto_pan.image&200 OK
canera.motion.auto_trace.image&200 OK
Interpretation Save current image settings for Auto Pan and Auto Trace. Common image settings are used for both
of Auto Pan and Auto Trace. Saved settings are iris, BLC and white balance. Saved settings are applied during Auto
Pan and Auto Trace.
Allowed users admin, operator
Note of Iris Setting: After power on, iris setting of Home position is applied. After moving to preset position, iris
setting of the position is applied. During Auto Pan and Auto Trace, iris setting for Auto Pan and Auto Trace is
applied. When iris setting is changed by API, the change is temporal. To save current iris setting for preset position,
use camera(num).status=save. To save current iris setting for Auto Pan and Auto Trace, use
camera.motion.auto_pan.image=save.
Getting Iris from VN-V686
Format /api/param?camera.iris
Example of response camera.iris=autoM&200 OK
Interpretation Acquire iris setting. When iris is manual, value from 0 to 100 is returned. When iris is auto,"autoL",
"autoM" or "autoH" is returned. 100 means full open.
Allowed users admin, operator, user
27