Getting alarm action from vn-v686 – JVC VN-V686UAPI User Manual

Page 37

Advertising
background image

Allowed users admin, operator

Getting Alarm Action from VN-V686

Format

/api/param?application.event(Number).action

Example When Getting action of alarm action No. 1

/api/param?application.event(1).action

Example of Response

application.event(1).action=mailto/[email protected]/none/Message&200

OK

Interpretation Acquire the alarm action of the specified alarm action number. 5 alarm actions and 1 periodic FTP

assigned to No.6 are available, so alarm action number can be 1 to 6. Note that alarm numbers are different from the

alarm input pin numbers. A separate API (/api/param?application.event(Number).status) is used to acquire the on/off

status of the alarm action.

When no action is specified, response below is returned.

Example of Response

application.event(1).action=&200 OK

When sending mail is specified, mailto, mail address, JPEG attaching and the character string to be sent will be

returned. When spaces are included in the character string, the character string with spaces will be returned. Segments

are indicated by /. If JPEG attaching is on, "object01" is returned, and if JPEG attaching is off, "none" is returned.

Example of Response

application.event(1).action=mailto/[email protected]/object01/Message&2

00 OK

When "PrePostRecording + FTP" is specified, recftp, FTP number, and the attached object number will be returned.

Segments are indicated by /. The FTP number is fixed as ftp01 at all times. The object number is fixed as object01.

Parameters of FTP can be gotten by other APIs, application.ftp and application.object.

Example of Response

application.event(1).action=recftp/ftp01/object01&200 OK

When sending via TCP is specified, tcpto, IP address, port number and the character string to be sent will be returned.

Segments are indicated by /.

Example of Response

application.event(1).action=tcpto/10.0.0.100/20000/Message&200 OK

When sending via UDP is specified, udpto, IP address, port number and the character string to be sent will be

returned. Segments are indicated by /.

Example of Response

37

Advertising