JVC VN-V686UAPI - Manual (Page 87)

Format /api/param?network.destination(2).status
Example of Response network.destination(2).status=off&200 OK
Interpretation Acquire status of MPEG-4 multicast streaming. Either on or off will be returned.
Allowed users admin, operator
Setting Status of MPEG-4 Multicast Streaming, or Save Changes for VN-
V686
Format /api/param?network.destination(2).status=data
Example /api/param?network.destination(2).status=start
Example of Response network.destination(2).status&200 OK
Interpretation Start/stop MPEG-4 multicast streaming, or save changes to multicast streaming settings. Specify
"start", "stop" or "save". Changes of multicast streaming settings become valid by "save".
Multicast stream is RTP compliant. Marker bit of RTP header is 1 when the RTP packet has last data of VOP.
If power becomes off during multicast streaming, the streaming starts automatically after power on.
Allowed users admin, operator
Getting MPEG-4 Multicast Address from VN-V686
Format /api/param?network.destination(2).host
Example of Response network.destination(2).host=225.0.1.2&200 OK
Interpretation Acquire MPEG-4 multicast address.
Allowed users admin, operator
Setting MPEG-4 Multicast Address for VN-V686
Format /api/param?network.destination(2).host=data
Example /api/param?network.destination(2).host=225.0.1.2
Example of Response
network.destination(2).host&202 Accepted(network.destination(2).host=save)
Interpretation Change MPEG-4 multicast address. Specify from 224.0.0.0 to 239.255.255.255. To validate the
change, use "network.destination(2).host=save" API. After the save, start streaming by
"network.destination(2).host=start" API.
Allowed user admin
Getting MPEG-4 Multicast Port Number from VN-V686
Format /api/param?network.destination(2).port
Example of Response network.destination(2).port=59152&200 OK
Interpretation Acquire MPEG-4 multicast port number.
87