Juniper Networks J-Series - Manual (Page 125)

Table 47: J-Web Monitor Options and Corresponding CLI show Commands (continued)
Corresponding CLI Commands Function Monitor Option
■ Route information
■ show route terse
■ show route detail
■ OSPF information
■ show ospf neighbors
■ show ospf interfaces
■ show ospf statistics
■ BGP information
■ show bgp summary
■ show bgp neighbor
■ RIP information
■ show rip statistics
■ show rip neighbors
■ DLSw information
■ show dlsw capabilities
■ show dlsw circuits
■ show dlsw peers
■ show dlsw reachability
Displays routing information through the following options:
■ Route Information—Information about the routes in a routing
table, including destination, protocol, state, and parameter
information. You can narrow the list of routes displayed by
specifying search criteria.
■ OSPF Information—Summary of OSPF neighbors, interfaces,
and statistics.
■ BGP Information—Summary of BGP routing and neighbor
information.
■ RIP Information—Summary of RIP neighbors and statistics.
■ DLSw Information—Summary of DLSw circuits and peers.
For details, see “Monitoring Routing Information” on page 115.
Routing
■ Interfaces— show class-of-service
interface
■ Classifiers— show class-of-service
classifier
■ CoS value aliases— show
class-of-service code-point-aliases
■ RED drop profiles— show
class-of-service drop-profile
■ Forwarding classes— show
class-of-service forwarding-class
■ Rewrite rules— show
class-of-service rewrite-rule
■ Scheduler maps— show
class-of-service scheduler-map
Displays information about the performance of class of service on
a router through the following options:
■ Interfaces—Displays the physical and logical interfaces in the
system and provides details about the CoS components
assigned to these interfaces.
■ Classifiers—Displays the forwarding classes and loss priorities
that incoming packets are assigned to based on the packet's
CoS values.
■ CoS Value Aliases—Displays the CoS value aliases that the
system is using to represent Differentiated Services code point
(DSCP), DSCP IPv6, MPLS experimental (EXP), and IPv4
precedence bits.
■ RED Drop Profiles—Displays detailed information about the
drop profiles used by the system. Also, displays a graph of
the random early detection (RED) curve that the system uses
to determine the queue fullness and drop probability.
■ Forwarding Classes—Displays the assignment of forwarding
classes to queue numbers.
■ Rewrite Rules—Displays packet CoS value rewrite rules based
on the forwarding classes and loss priorities.
■ Scheduler Maps—Displays the assignment of forwarding
classes to schedulers. Schedulers include transmit rate, rate
limit, and buffer size.
For details, see “Monitoring Class-of-Service
Performance” on page 123.
Class of Service
(CoS)
Monitoring Overview ■ 103
Chapter 7: Monitoring the Router and Routing Operations