Juniper Networks J-Series - Manual (Page 126)

Table 47: J-Web Monitor Options and Corresponding CLI show Commands (continued)
Corresponding CLI Commands Function Monitor Option
■ Interfaces— show mpls interface
■ LSP information— show mpls lsp
■ LSP Statistics— show mpls lsp
statistics
■ RSVP Sessions— show rsvp session
■ RSVP Interfaces— show rsvp
interface
Displays information about MPLS label-switched paths (LSPs) and
virtual private networks (VPNs) through the following options:
■ Interfaces—Information about the interfaces on which MPLS
is enabled, including operational state and any administrative
groups applied to an interface.
■ LSP Information—Information about LSP sessions currently
active on the Services Router, including inbound (ingress) and
outbound (egress) addresses, LSP state, and LSP name.
■ LSP Statistics—Statistics for LSP sessions currently active on
the Services Router, including the total number of packets
and bytes forwarded through an LSP.
■ RSVP Sessions—Information about RSVP-signaled LSP
sessions currently active on the Services Router, including
inbound (ingress) and outbound (egress) addresses, LSP state,
and LSP name.
■ RSVP Interfaces—Information about the interfaces on which
RSVP is enabled, including the interface name, total
bandwidth through the interface, and total current reserved
and reservable (available) bandwidth on the interface.
For details, see “Monitoring MPLS Traffic Engineering
Information” on page 130.
MPLS
■ show services service-sets
summary
■ show services service-sets
memory-usage
Displays information about configured service sets.
For details, see “Monitoring Service Sets” on page 135.
Service Sets
■ Stateful firewall information
■ show services stateful-firewall
conversations
■ show services stateful-firewall
flows
■ IDS information
■ show services ids
destination-table
■ show services ids source-table
■ show services ids pair-table
Displays firewall and intrusion detection service (IDS) information
through the following options:
■ Stateful Firewall—Displays the stateful firewall configuration.
■ IDS Information—Displays information about the configured
IDS.
For details, see “Monitoring Firewalls” on page 136.
Firewall
■ show services ipsec-vpn ipsec
statistics
■ show services ipsec-vpn ipsec
security-associations
■ show services ipsec-vpn ike
security-associations
Displays configured IPSec tunnels and statistics, and IKE security
associations.
For details, see “Monitoring IPSec Tunnels” on page 140.
IPSec
■ show services nat pool Displays configured NAT pools.
For details, see “Monitoring NAT Pools” on page 142.
NAT
104 ■ Monitoring Overview
J-series™ Services Router Administration Guide