Juniper Networks J-Series - Manual (Page 168)

Table 77: Summary of Key RPM Output Fields (continued)
Additional Information Values Field
Shortest round-trip time from the Services Router to
the remote server, as measured over the course of
the test. Minimum
RTT
Longest round-trip time from the Services Router to
the remote server, as measured over the course of
the test. Maximum
RTT
Average round-trip time from the Services Router to
the remote server, as measured over the course of
the test. Average
RTT
Standard deviation of round-trip times from the
Services Router to the remote server, as measured
over the course of the test. Standard
Deviation
RTT
Total number of probes sent over the course of the
test. Probes Sent
Percentage of probes sent for which a response was
not received. Loss
Percentage
Round-Trip Time for a Probe
The Services Router maintains records of the most
recent 50 probes for each configured test. These 50
probes are used to generate RPM statistics for a
particular test. Total number of probes used for the data set. Samples
System time when the first probe in the sample was
received. Earliest
Sample
System time when the last probe in the sample was
received. Latest
Sample
Average round-trip time for the 50–probe sample. Mean Value
Standard deviation of the round-trip times for the
50–probe sample. Standard
Deviation
Shortest round-trip time from the Services Router to
the remote server, as measured over the 50–probe
sample. Lowest
Value
System time when the lowest value in the 50–probe
sample was received. Time of
Lowest
Sample
Longest round-trip time from the Services Router to
the remote server, as measured over the 50–probe
sample. Highest
Value
System time when the highest value in the 50–probe
sample was received. Time of
Highest
Sample
146 ■ Using the Monitoring Tools
J-series™ Services Router Administration Guide